TOPP PRO TD-3000 POWER AMPLIFIER

Model TD 3000 Power Specifications Continuous Power 4 x 340 Watts at 8 ohms (0.5% THD) 4 x 550 Watts at 4 ohms 2 x 1500 Watts at 8 ohm (Bridged mono mode) Electrical Specification Input Sensitivity 1.0V Input Impedance 10K Unbalanced Frequency Response 20Hz – 20KHz (+0dB / -3dB) Voltage Gain 32dB Distortion (SMPTE: 1M) <0.5% S/N Ratio 110dB Inrush Current at initial switch on 16.96A Inrush Current after power supply interruption 19.62A General Specifications Front Controls AC power switch, 2 channel level control; -∞ to +30 dB Rear Controls 30 Hz high-pass filter on/off, bridge/stereo/parallel mode Signal Indicators Signal present (green LED), Clip (red LED), protection (red LED) Power Indicators 1 blue LED integrated with power switch Protection On/Off, mute, DC-fault, load Input Connectors Balanced XLR-F / 1/4" Combo Power Supply 100VAC or 110-120VAC or 220-240VAC (50Hz/60Hz) Dimensions Width / Large / High 19” x 14.8” x 3.5” (483 x 376 x 88.8mm) Weight Kilograms 7.9 Kg Pound 17.6 Lbs